AC SmartSeal Instructions

Step1_CoolEnhancer_BrassHose_Cutout_PNGDose: Approximately 2 oz (60 ml) on systems up to 10 tons. 4 oz (120 ml) up to 20 tons.

  1. Use under 40 psi.  If needed, perform a pump down by closing high side valve to reduce low side pressure.
  2. Connect male adapter to end of syringe, and purge air out of hose by pushing sealant through clear hose.
  3. Connect female adapter to low-pressure port side and push in with the syringe plunger.
  4. Allow 30 minutes for the seal to take place with system running.

*Cannot be used on high (liquid) side, only low side.