FixQuick

Ultra-Fast UV Florescent Leak Stop

FixQuick is the new ultra-fast leak stop and quick leak repair by Errecom, specifically formulated to repair in 20 seconds leaks up to 1 mm in diameter on flat and curved surfaces. It guarantees a seal up to 725 PSI and 480° F. It can be used on metals and plastic components of AC/R systems. Its fluorescent formulation allows an easy check on the status of the fix using a UV lamp and to identify any previous repairs.

Features

Formula Step 1 +Step 2+Step 1 = easy to use
20 seconds to repair the leak that can withstand a pressure of 20 Bar (290 Psi)
20 minutes to repair the leak that can withstand a pressure of 50 Bar (725 Psi)
It resists up to 480°F

How To Use FixQuick

STEP 1: Apply the product on a perfectly dry and clean surface. It is recommended to clean the area with sandpaper. Remove any residuals that could affect FixOuick performance.

STEP 2: Apply the STEP1 liquid product on the leaking area and the around surface without pressure.

STEP 3: Cut off the tip of STEP2 bottle, and apply the STEP2 powder on the surface just treated creating a thin layer.

STEP 4: Apply once again the STEP1 liquid product to obtain a homogeneous preparation.

STEP 5: Wait 20 seconds for a repair that can withstand a pressure of 20 Bar (290 Psi) and 20 min (at standard room-temperature of 20°C) to withstand a pressure of 50 Bar (725 Psi) and 480°F.

FixQuick is the only quick leak repair product you will need. Contact one of our distributors today.

Need More Information?