SmartSeal Quick shot

SmartSeal Quick shot

Instructions for the use of Easy Inject Kit in A/C Systems

DONE IN 4 EASY AND VERY FAST STEPS :

#1 Turn the A/C system on. If the unit is a heat pump, be sure it is set on cooling mode. Connect the cartridge to Easy Inject and fully inject sealant in it.

#2 Connect Easy Inject to the low-pressure service port of A/C system. Connect a charging hose to a refrigerant cylinder.

#3  Briefly open the cylinder valve to purge air out of the charging hose. Quickly tighten the charging hose fitting to Easy Inject. Inject refrigerant through Easy Inject and push sealant into the A/C system.

#4  Run A/C system for 30 minutes to allow the product to fully circulate.

SmartSeal Instructions